Holley 0-1850S 600 CFM Classic Holley Carburetor

Description

The universal calibration makes for easy bolt-on performance, Includes vacuum secondaries for use on wide variety of vehicles, An ideal performance upgrade for stock to mildly modified vehicles, Carb is 100% wet-flow tested by Holley technicians to assure it arrives ready to run, Features a vibratory polished aluminum for good looks, weight savings and long lasting shine
Holley 0-1850S 600 CFM Classic Holley Carburetor
Sku # 42501850S
Mfr. Part # 0-1850S
Condition
New
Brand
Holley
Sold
Each
Details
Info
One of the most trusted carburetors of all times -the 1850! Its 600 CFM of airflow, vacuum secondaries, single fuel inlet and mechanical choke makes it amazingly universal. The 1850S has a shiny finish that will make you proud to pop the hood on your ride. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's.
Vibratory polished for good looks
Performance upgrade for stock to mildly modified vehicles
Universal calibration for easy bolt-on performance
Manual choke (cable actuated - hand controlled) for precise cold start control
Vacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing & transmissions to allow smooth opening of secondaries.
Single feed fuel inlet for easy installation
Ford A/T kickdown
Power valve blow-out protection
100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Charts
(PDF)
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Aluminum
Sold in Quantity
Each
CFM
600 CFM
Choke Type
Manual
Fuel Type
Gasoline
Carburetor Barrels
4-Barrel
Secondary Type
Vacuum
Fuel Inlet Type
Single
Carburetor Flange Type
4-Barrel Square Bore
New or Remanufactured
New
Emission Code
3
Number of Circuits
2
Supercharged Application
No
Booster
straight
Throttle Bore
1.563 inch
MFG. Part #
0-1850S
GTIN Code
090127420072
CFM Range
600-699 CFM
Model
4160
Bolt Hole Pattern
5.160" x 5.625"
Finish
Shiny
Reviews
Carburetor
Rated
by Bone on June 12, 2021
Summary:
Carburetor works great!
Yes, I recommend this product.
I would purchase this again
Rated
by Chuck on February 23, 2021
Summary:
Used on my 72 nova. Bolted on and started right up. Minor adjustments only.
Yes, I recommend this product.
Speedway does it right!
Rated
by mouse on February 08, 2019
Summary:
Waiting for summer to get the build out on the road. T-Bucket
Yes, I recommend this product.
Fantastic Four
Rated
by Shadow on November 13, 2018
Summary:
I can't say enough about Holley. This carb really done the trick. Installation was a breeze and no adjustment was made to get my 383 Stroker purring. Just opening the box from the manufacturer will give you a good feeling about what to expect. The smell of fuel let's you know this thing was tested properly before it made it's way to you.
Yes, I recommend this product.
As expected
Rated
by Flash on September 30, 2018
Summary:
Bolted on and took care of my problem, nice and shiny also. Would buy another one if I needed to
Yes, I recommend this product.
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.